poolife® Stain Lift


Stain Lift is a concentrated, granular stain remover for swimming pools. Use as directed to quickly remove stains caused by copper, iron and manganese. After stains are removed, follow up with the weekly addition of poolife® Stain Stop.

  • 2.5 lbs
  • Case of 12

Adjust pH between 6.8 and 7.2 and allow free chlorine level to drop below 2.0 ppm, then add 2.5 lb per 20,000 concentrate product in areas where stains are most prevalent. Allow to circulate for 24 hours then readjust the pH to 7.4-7.6 and total alkalinity to 80 – 120 ppm ranges. Maintain normal sanitizer levels. Do not shock for at least 72 hours.

For maintenance and prevention of stains add poolife® Stain Stop once a month

Can be used with all chlorine, bromine, salt water, ozone and mineral based sanitizing systems

For removal of metallic stains including iron, copper, manganese

  • This product can be used on most pool surfaces including gunite, most plaster, concrete, vinyl and fiberglass. 
  • This product is not intended for use on pools with black plaster.